jeudi 29 avril 2021

µPF--2 : Final Beta Version

By reworking the layout of the components, I finally had enough room to implement all of the extension connector signals. All I have to do now is to create the printed circuit board:


The final circuit is quite large in the end, given all the elements that are implemented.

Eventually, I hope to be able to operate these various original expansion boards knowing that they are intended for a µPF1P and not a µPF1 or 1B :

Printer & I/O boards.

Interesting informations on this subject are available on this site: https://fjkraan.home.xs4all.nl/comp/mpf1/



jeudi 22 avril 2021

µPF--2 : Finally it should look like this!

As I mentioned in a previous post, it is not always easy to arbitrate between the capacities of a system and the difficulty of its material realization, especially if in addition the final price must be as tight as possible.

For this uPF--2 I considered several possibilities before arriving at a system which I believe to be sufficiently simple but efficient for the envisaged use.

Here in 3D what should look like the system :



Due to the FPGA used, I reduced the expansion bus to only addressing peripherals. This should be more than enough to create I / O expansion boards of all kinds.

This system takes all the characteristics of the original board of Wichit Schirichotte, but largely improved in terms of capacities and speed of execution.

http://www.kswichit.com/Z80/Z80.html

mercredi 14 avril 2021

µPF--2 : Argh!!!

Studying an electronic board is, like many things, a matter of compromise. You have to make a choice between what you want to offer, the complexity of the schematic, and ultimately, the material feasibility.

The result of my previous study resulted in a fairly complex system. In fact, too complex for this type of subject. So I decided to deport all the FPGA part on a pre-fabricated board.

This brings as a result not only that the most delicate parts of the study are now on a circuit very easy to integrate, but in addition, offers a higher end FPGA. This still greatly simplifies the final board.

The result is now much simpler:


And voila! It should be easier to route now.

mardi 30 mars 2021

RETRO COMPUTING : THE FOENIX BOARD

You know what? This morning the postman had a little surprise from Canada for me:


A new type of processor board specially developed for retro-computing, based on the WDC65C816S @ 14MHz processor and with at least 2MBytes of system RAM. Interesting isn't it?


It only remains to learn how to use it to develop interesting applications. Admit that this type of system is still more 'fun' than the endless and practically all identical boards on which the same Linux has been running for over 20 years!

lundi 22 mars 2021

uPF--2 : Beginning of electronic board design.

After having worked on several personal electronic boards as well as on the reissue of microcomputers, I can finally start designing my personal FPGA board.

This is a minimal system intended to replace the Z80 µPF--1 compatible development kit that I have mentioned several times on this blog.

The diagram looks something like this:







Overall this board is not very complicated and pretty much picks up the basic elements of the original design. I just added a few useful components that were lacking on the base board. 

I also modified the extension connector to present only a few interesting signals and not all of the data and address buses. I prefer to use expansion boards already created for other systems rather than recreating specific expansions.

It remains now to perform the most difficult part, the routing of the board:


It's not what I like most to achieve ;-)


mercredi 17 mars 2021

OMEGA MSX COMPUTER : FIRST START

As I mentioned in my previous post, this computer is not very difficult to assemble for those who have decent experience in this type of work. In fact, the hardest part is getting all the components. At one point, we still come to the end of this quest:


The 'only' component that is missing is the battery. But Cbios (MSX compatible) can do without it. The first start using a laboratory power supply with controlled intensity allowed me to avoid the 'magic smoke'!

And voilà :


The message is clear, the system is now waiting for an application cartridge. Note that I did not mount the keyboard proposed by the designer of this system. Standard USB keyboards are much less expensive. I intend instead to develop an interface allowing the use of a commercial keyboard on this computer.

There is therefore still a little work to be done to be able to use this MSX computer in a comfortable way, but the basic system is operational. This is a very good start. Well done to the designer of this Omega!


mardi 9 mars 2021

OMEGA MSX COMPUTER

With Covid, it's not very easy to move forward with the projects I'm working on right now. For example, I am mounting an MSX type computer board. This is Sergey Kiselev's Omega project available on Github at this address: https://github.com/skiselev/omega. The computer looks like this when mounted:

https://github.com/skiselev/omega

This computer is built from standard 'old' components but still relatively easily available. On the other hand, this implies the use of a multitude of sources of supply because it is totally impossible to find all the components from one supplier. Not that it's complicated, but it really takes a lot of time and organization. We also have to face long delivery times due to the Covid. The assembly of the board is not of great complexity but requires patience and a good practice of the soldering iron. It is definitely not a beginner's job.

My first board is almost finished: 


In fact, I have ordered components for several boards. No need to generate all these global transports for a single copy. I may offer a few mounted boards for sale. I plan to use this first one as a prototype for some future developments, because the MSX standard is still active and dynamic.

The Z80 which equips this type of equipment is definitely an excellent processor for familiarizing yourself with the architecture of computers and their programming. This is obviously a totally different approach to the 'virtual' world that is programming under Windows for example. I think that creating an application for such a machine is much more rewarding than running your first (boring) 'Hello World' application in its 'little window' ;-)

Other projects will soon be completed. I'll post on this blog when it's done ....