The saga of this cartridge : Initially, I developed a cartridge based on a single RISC-V microcontroller, downloadable via USB using disk tr...

After my misadventures trying to create an MSX cartridge with the help of an embedded processor, I decided to dive headfirst into the fantas...

Since the September term started, I haven't been idle. The first topic I tackled is the flash cartridge for MSX computers. To recap, it...

What a surprise it was when, upon returning from a few days of vacation, I found signs in front of every newsstand displaying the year 1976 ...

  Back to basics... Over a decade ago, I invested time in learning FPGAs. At the time, I thought it was a good idea—and I was probably right...

A month after my last publication on the subject, a little progress... And yes, I spent a lot of time on the EMU1 motherboard which, if it s...

The fact is that I have made good progress on the transcription of the Drumulator into an FPGA. But what craftsmanship job is the management...

Getting started with the Trion FPGA. For the past few days, I have been trying to operate a minimal Z80 system with the aim of implementing ...

It's been two to three years since I fully understood the 'democratic' operating (or dysfunctional) system of France. I know for...

I discovered GoWin FPGAs a few years ago. I have nothing to say about these FPGAs. They work well, the software also works correctly. Everyt...

To finalize my uPF--1 compatible board, I decided to implement the Wichit Sirichote's project :  I have already done this work a few ye...

It's been a few years since I mentioned the rise of China in the supply of original components. GoWin is one of those companies that for...

I'm always looking for easy to use components. As far as FPGAs are concerned, their implementation is not always easy nor always cheap (...