And Now for Something Completely Different : Jean-Luc Van Den Heede

Je ne connais pas personnellement VDH, mais je l'ai souvent côtoyé entre 1982 et 1985 au lycée ou je préparais mon bac. Et non, VDH n'est pas surnommé VDH que dans le milieu de la voile. A Saint Jo. tout le monde le connaissait sous ce 'pseudonyme'.

Bien que pratiquant la voile, à l'occasion, je ne suis pas un fan des courses au large. Mais cette G.G.R., ce tour du monde à l'ancienne, sans instruments, sans assistance, ça n'est pas une course, c'est autre chose, il y a forcément du  Moitessier la-dedans.

A 73 ans, VDH ne fera plus de tour du monde à la voile. Celui-ci, son dernier, il l'a gagné. Alors je suis arrivé tôt à Olonne :

7h30.

j'ai longé les différents ports pour rejoindre l'entrée du chenal :

8h.

L'attente a commencé sous une pluie fournie mais pas suffisante pour décourager les spectateurs dont le nombre s'est mis à croître sans discontinuer :

9H.

Peu avant 10h, le voilier de VDH pointe sa proue, au loin :

Et enfin, la remontée triomphale jusqu'au port de plaisance :

Plus tard dans la matinée.

Quelles peuvent être les sensations dans un tel moment, quand on est conscient d'avoir réalisé quelque chose de grand?

Bravo Monsieur, merci et bon vent...

Restent en course au 29 janvier 2019:

• Mark Slats, parti se réfugier au sud du Golfe de Gascogne pour échapper à Gabriel, et qui risque d'écoper d'une pénalité... 29 janvier 17h : Mark Slats semble avoir changé d'avis et se dirige de nouveau vers Les Sables. 36h de pénalités qui seront ajoutés à son temps de course. A suivre...
• Uku Randmaa et Istvan Kopar qui se tirent la bourre au large du Brésil.
• Tapio Lehtinen qui devrait enfin réussir à passer le Horn d'ici quelques jours, toujours dans les temps de Robin Knox-Johnston.

Avec une pensée pour ceux qui ont du abandonner, notamment dans les mers du sud :

• Abhilash Tomy.
• Susie Goodall.
• Loïc Lepage.

Sans compter Philippe Péché avec qui la course en tête aurait pu être... plus disputée.

Et tous les autres...

UPDATE 1/02/2019

Je ne pouvais pas y être, alors j'ai suivi l'arrivée de Mark Slats en live sur les médias sociaux :

Superbe arrivée... Bravo!

The expanded Drumulator back home.

The customized Drumulator with the Wave-Rom switcher and the OS-Rom switcher boards...

Wave-Rom switcher board.

OS- Rom switcher board.

found his owner again and a new companion :

Nice team!

JX-8P Repair.

This time, I got a JX-8P in a mint condition apart from two voices that posed a problem with the VCF.

Pretty vintage machine!

After passing the test procedure, it was obvious that voices A and E posed a real VCF worry. In a first time, as I had the same kind of problem with a JX10, I thought I was in the same situation so I ordered two IR3R05 :

And placed them on two IC sockets :

Ok! And does it work better now? NO. Too simple!

No choice, I have to test the control voltage coming from the two ICs, CD4051 (IC44)  and the TL064 (IC51) :

I noticed that effectively, the voltage comming from the par C and D of the IC51 (TL064) didn't match the requierd values. So I replaced this two ICs, the TL064 (TL084 works fine in place of the original TL064) and the CD4051 (IC44). As I was there I also replaced the IC43 (CD4051) circuit which supplies the voltages control for the VCA part of the IR3R05 :

The three ICs on socket.

After this modifications, the voice E working good but, the voice A did not provide any sound. I had to go to the next step and use the oscilloscope to determine that the capacitor C88, whose role is to provide the sample and hold function, was in fact in short circuit with the ground. I nerver had this problem before with this kind of interface in a Roland hold synth! I replaced this capacitor with a new one in smt version. I soldered this 805 type capacitor on the other side of the board. After this last modification, all the voices were working very good : Yes!

Finally, troubleshoot this JX-8P was not very difficult, even though I have now two IR3R05 fully functionnal in stock. I will keep them preciously, just in case...

Inside this JX-8P (before my repairs) :

No dust, no mold, no rust and no... beast : absolutely perfect!

Not even blackish traces of heat on the power supply!

Good, but before reassembling the machine, there is again to take care of the backup of the static ram :

 
I decided to have no more problem with the backup battery. So I made a copy of my auto-saved SRAM :

It's a solution that works perfectly for a stand alone auto-saved replacement for the 6116 SRAM. I also have a version to replace the 62256 type SRAM. Before it's installed in the JX, I tested it with my EPROM programmer :

OK, it's time to put it in place :

Of course, no more battery is needed :-).

The internal patchs are reset at startup :

But, after copying the preset number one into the internal number one memory, and after restarting the JX, the patch number one is still present :

Voilà, a superb vintage synthesizer ready to play again for many years!

Drumulator : how to switch between two banks of sound?

Originally, the Drumulator has a basic sound bank. Over the time, some people wanted to replace the original sounds. The operation was not very difficult since it was enough to replace the four basic EPROMs with four others containing the new sounds.

The original mother board.

Replacing the original sounds was a good idea, but in this case, the basic sounds were lost. Then additional printed circuits board appeared, which allowed to switch between two or more banks of sound :

or the more famous JL Cooper board:

Why not! But these boards have the disadvantage of being large and must contain a large number of EPROM. 2 x 4 EPROMs for two sound banks plus possibly two EPROMs for the system if Digidrum sounds are used for a total of 10 EPROMs, just for two banks of sound!

So I thought it might be better to concatenate four 16K byte EPROMs into one 64K byte. This makes it possible to propose two banks of sounds in only two EPROMs. So I developed an electronic board that contains two banks of sound that can be selected with a simple switch.

The result is a small circuit board :

The switch in not yet connected...

Well. The problem is that if you want to have a Digidrum sound bank, you also need a modified system EPROM.

In the same way, I decided to develop a circuit board allowing to select two system EPROMs.

Here too, the principle has been to concatenate two system EPROMs into a single EPROM. This requires some file manipulations to be programmed in the final EPROM, but this makes it possible to build a small printed circuit board :

Not bad, isn't it?

But that's not all. On this circuit board I added the following features :

• Two banks of RAM selectable by switch.
• 20CR32 battery backup with socket, instead of the original big battery.
• Better RAM protection when turning the machine on / off (nerver more the 'Bad' message).
• Implementing the MIDI interface.
• Control of the EEPROM sounds board if necessary (in case of one Digidrum sound bank).
• And, obviously, the selection of two system EPROMs. 

And voilà!

Only two small and easy modifications are to be made on the motherboard for the power good function (juste one wire to be soldered), and for the MIDI function (two pin to be soldered together on the IC13F as the 'normal' MIDI extension).

Therefore, it is also possible to remove the 'DIY' MIDI interface of this kind :

Hum!!!

And now, an expanded Drumulator :

Sérial  #1477 :

Enjoy!